Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item 41-CA-168 - Catalyst - Methanol
Manufacturer
Sud Chemie
Model

MegaMax 700 by Sud Chemie, 4 drums of Catalyst - New drums "Methanol Catalyst" - New drums. Note: Inventory not verified but believed to be (4) drume - new, not activated. - These catalyst drums may not be available:

Place Holder
Item 41-CA-196 - Catalyst - Sulfur Guard Bed
Manufacturer
Haldor Topsoe
Model

Catalyst - 2 drums of sulfur guard by Haldor Topsoe HTZ-4. 80-90% zinc oxide and 10-15% aluminum oxide, and 2 drums of Haldor Topsoe A/S. Alumina: 7 drums of alumina support balls packing rings. Catalyst: 3 drum TotsuCat AMA-1 catalyst. New drums

Place Holder
Item 41-R-168 - Catalytic Converter Reactor
Manufacturer
Wagner
Model
3.9 MMBTU
Capacity
7600

Catalytic Converter designed for 3.9 MMBTU/hr. Design specifications are for 14,500 gallons/day crude methanol or 12,500 gal/day mixed alcohols. Mfg by Wagner Plate Works in 2009. Size approx 7 ft dia ID x 17 ft s/s x 30 ft overall height for approximately 7,600 gallons capacity - tube bed approx 17 ft long. Has 1,028 x 1.9" O.D. tubes Sch 80 stainless steel TP304L, shell cs 516-70 4 inch thick. ASME Nat'l Bd 55, MAWP shell 2250 psig/FV at 650 F. MAWP tubes 1650 psig at 650F. Converter currently loaded with approx 150 cu ft methanol catalyst - Sud Chemie MegaMax 700. Still installed - price does not include removal. Note: we have the complete reactor module as well with all pieces shown in photos plus instruments - see asset ID FP411.

Place Holder
Item 31-Z-204 - Chiller 140 Ton
Manufacturer
Industrial Refrigeration Systems
Model
Frick 140 ton
Capacity
140

Ammonia refrigeration system with Frick 140 ton rotary screw ammonia (R717) compressor. Motor 300HP 3500rpm 460v/3/60. ASME rated at 450/FV at 350F. Frick ammonia compressor model RXF-101-H, s/n 10240E92525967 with liquid injection cooling. Includes Quantum LX control panel. Built by Industrial Refrigeration Systems in Aug 2009. The touch screen has suffered sun damage and will have to be replaced. Last used for solvent cooling with ammonia in syngas process at a capacity of 1.68 MMBTU/hr of Syngas at a flow of 101,940 #/hr 46/13F. Like new - only ran 42 days. Shut down in Jan 2011. Includes S-1 Separator 24" dia, water cooled ammonia condensing unit uses 750 gpm water, evaporator, Condenser, Receiver on separate skid, auxiliary instruments attached to equipment. Still installed - price does not include removal. See drawings in Links.

Place Holder
Item 31-FL-192A - Coalescer Filter
Manufacturer
TM Industrial
Model
Coalescer 382

Coalescer Filter Rated at 15683 #/hr, 100 PPMW solids, 5 psig DP. ASME MAWP 800 psig at 250F external/FV at 350F, Nat'l Bd# 6164, s/n 6169. Capacity 5958 ACFH, 1 micron. Material is carbon steel. Probably TM Industrial Model 382 - see brochure in LINK. Used as Gas Clean-up Pre-Filter/Coalescer.

Place Holder
Item 31-FL-192B - Coalescer Filter
Manufacturer
TM Industrial Coalescer
Model
382

Coalescer filter Rated at 15683 #/hr, 100 PPMW solids, 5 psig DP. ASME MAWP 800 psig at 250F internal/FV at 350F, Nat'l Bd# 6165, s/n 6170. Capacity 5958 ACFH, 1 micron. Material is carbon steel. Probably TM Industrial Model 382 - see brochure in LINK. Used as Gas Clean-up Pre-Filter/Coalescer.

Place Holder
Item 31-V-232 - Coalescer Filter
Manufacturer
Clark-Reliance
Model

Coalescer vessel, ASME MAWP 1650 psig/FV at 350F, Nat'l Bd# 3771, s/n CR-09-14436. Carbon steel. Built by Clark Reliance in 2009 - used 42 days, like new. Holds 5 filter elements. Used as 4th Stage Booster Discharge Coalescer - not sold separately, part of compressor module fp315

Place Holder
Item 31-V-164 - Condenser, Shell & Tube
Manufacturer
PPV Precision Pipe & vessel
Model

Condenser shell & tube heat exchanger. Manufactured by Precision Pipe & Vessel in 2009 - ran 42 days only - like new. Physical size 72" dia x 11'-6" . ASME rated MAWP 200/FV at 250F. Nat'l Bd# 679, s/n CV-0884. Material: tubes 304SS - shell carbon steel. Part of module fp311. Used as Flash Drum, High Pressure

Place Holder
Item 31-FL-244 - Filter
Manufacturer
TM Industrial
Model
filter

Vertical single stage filter, 10 micron, carbon steel, 3" pipe in/out top entry. Designed for 101,940 #/hr (205 gpm) solvent with 0.2 PPMW solids, 5 PSID. MAWP 450 psi/FV @350F, Nat'l Bd# 6166, s/n 6171. Used as solvent filter - like new. Mfg by TM Industrial in 2009, used 42 days.

Place Holder
Item 31-V-156 - Flash Drum, Atmospheric
Manufacturer
PPV Precision Pipe & Vessel
Model

Atmospheric Flash Drum. Manufactured by Precision Pipe & Vessel in 2009. ASME rated MAWP 150/FV T 250F. Material carbon steel. Part of Absorber & cleanup module FP311

Place Holder
Item 31-E-104 - Heat Exchanger, Hairpin 223 sf
Manufacturer
Koch Heat Transfer Co.
Model
08120-MTT-AAB
Capacity
223

Fin tube heat exchanger, hairpin design, 1 turn u-tube mfg by Koch Heat Transfer Company. Model 08120-MTT-AAB Has 223 sq ft heat exchange area. Rated at 1.81 MMBTU/hr, Syn Gas 300/110, Water 90/110F. 0.75/0.065, 2700 #. ASME rated at 215/FV at 350F. Shell and tubes are both Stainless steel 304L. Physical size 8.6 inches dia x 13'-5" overall length. Built in 2009 - ran only 42 days - like new. We have U-1A and drawings - see Links. Used as 1st Stage Booster Intercooler.

Place Holder
Item 31-E-220 - Heat Exchanger, Hairpin 228 sf
Manufacturer
Koch
Model
1.46 MMBTU HEx
Capacity
228

Koch Heat exchanger, hairpin design 228 sq ft heat exchange area. Rated at 1.46 MMBTU/hr. Water 90/110F, Syn Gas 300/110F. 0.75/0.065, 3170 #. ASME MAWP 800/FV at 350F. Physical size 8 in dia sch 40, tubes 304SS/shell cs. Built by Koch Heat Transfer Company in 2009 - like new. We have U-1A and drawings - see Links. Used as 3rd stage booster intercooler.

Place Holder
Item 31-E-228 - Heat Exchanger, Hairpin 162 sf
Manufacturer
Koch
Model
HEx 1 MMBTU
Capacity
162

Hairpin heat exchanger Koch Heat Exchanger - hairpin design, 1 turn u-tube 162 sq ft surface area. Designed for 1.04 MMBTU/hr, Syn Gas 300/110F, Water 90/110F. 0.75/0.083, 2790 #. ASME MAWP shell 800 psig/FV at 350F, tubes 615 psig at 250F, Nat'l Bd# 19197, s/n 12110-09-4-01. Material 8 inch carbon steel. Built by Koch Heat Transfer Company in 2009 - used only 42 days - like new. We have U-1A and drawings - see Links. Used as 4th Stage Booster Spillback Cooler.

Place Holder
Item 31-E-208 - Heat Exchanger, Hairpin 298 sf
Manufacturer
Koch
Model
08156-MTB-AAB
Capacity
298

Fin tube heat exchanger, hairpin design, 1 turn u-tube built by Koch Heat Transfer Company in 2009. Model 08156-MTB-AAB. - 298 sq ft heat exchange area. Rated at 1.811.69 MMBTU/hr, ASME MAWP tubes 400 psig/FV at 350F and shell 305 psig at 250F, Nat'l Bd# 19195, s/n 12110-09-2-01. Water 90/110F, Syn Gas 300/110F. 0.75/0.065, 2950 #. Tubes stainless steel 304L shell carbon steel SA-106, size 8 in dia u-tube shell for 3 ft OAL. Hex envelope 16'-5" long x 23" wide x 3 ft tall. , schedule 40. We have U-1A and drawings - see Links. Used as 2nd Stage Booster Intercooler

Place Holder
Item 41-E-108 - Heat Exchanger, Shell & Tube 203 sf
Manufacturer
HED
Model
8.8 MMBTU HEx
Capacity
203

Heat exchanger designed for 8.8 MMBTU/hr, Stm 487/487F, Syn Gas 120/360F. Shell & Tube TEMA design NEU, 203 sq ft, 1"/0.109, 3550 #. ASME MAWP tubes 1650/FV at 550F and shell 1750 psig at 550F, physical size 13" dia X 12 ' for a capacity of 83 gallons. Shell / tube Material carbon steel. Built by Heat Exchanger Design (HED) in 2009 - like new. Nat'l Bd# 2231, sn 4017B. Last used as Syngas Preheater. We have U-1A - see links. (Part of module fp413)

Place Holder
Item 41-E-112 - Heat Exchanger, Shell & Tube 2151sf
Manufacturer
HED
Model
98 MMBTU HEx
Capacity
2151

Heat exchanger loop condenser designed for 98 MMBTU/hr, Water 90/110F, Reactor Effluent 300/105F. Shell & Tube design - TEMA design AEU. U-tube Heat transfer area 2151 sq ft, ASME MAWP tubes 1650 psig/FV at 385F, shell 150 psig at 250F. Nat'l Bd # 2932, serial# 4017C. Material 304LSS tubes/CS shell. There are 325 tubes sized 5/8" OD with 0.065" wall, Tubes are 304L stainless, Physical size 25" dia x 20 ft. Manufactured by Heat Exchanger Design (HED) in 2009. Physical weight 16,620 pounds. Ran 42 days - like new. We have U-1A - see Links. (Part of module fp413)

Place Holder
Item 31-E-188 - Heat Exchanger, Shell & Tube 5861 sf
Manufacturer
Heat Exchanger Design Inc.
Model
TEMA BFU 450 psig
Capacity
5861

Shell & tube heat exchanger, Rated at 450 psig 4.02 MMBTU/hr, HP Solvent 36/102, Lean Solvent 121/46F. Shell & tube, TEMA type BFU, 2-pass shell side, 2-pass tube side. Has 5861 sq ft, 0.75/0.083", 38,250 pounds. Manufactured by Heat Exchanger Design in 2009 - ran only 42 days - like new. ASME MAWP 450/FV at 350F, Nat'l Bd# 2891, s/n 4015. Physical size 38" dia X 28'. Material KCS (killed carbon steel). Has (611) 3/4" tubes material SA179 carbon steel. We have drawings and U-1A - see Links. Used as Solvent / High Pressure Liquid Exchanger on fp311.

Place Holder
Item 31-E-236 - Heat Exchanger, Shell & Tube 135 sf
Manufacturer
Precision Pipe & Vessel
Model
TEMA NEN
Capacity
135

Shell & tube heat exchanger, Rated at 1.44 MMBTU/hr, operating pressure 80 psig. Shell side Steam 324psi/307F, tube side HP Solvent 102psi/125F. Shell & tube TEMA Design NEN, 135 sq ft surface area, has 81 tubes 3/4" 14 gage tubing, 0.75/0.083, empty weight 1913 #. Manufactured by Precision Pipe & Vessel in 2009 - ran only 42 days - like new. ASME rated at shell 150 psi at 400F, tube 200 psi at 250F. Physical size 10 in dia x 8.5 ft long. Material: shell is seamless pipe carbon steel SA-106 grade B, tubes are carbon steel 14 gage. We have drawing in Links. Used as High Pressure Liquid Heater on fp311

Place Holder
Item 31-E-234 - Heat Exchanger, Shell & Tube 280sf
Manufacturer
Precision Pipe & Vessel
Model
NEN 800 psig
Capacity
280

Shell & Tube heat exchanger, Rated at 800 psi 0.364 MMBTU/hr, Treated Gas 21/100F, Raw Syn Gas 110/64F. Shell & tube, TEMA design NEN, 280 sq ft, 0.75/0.065, 3237 #. Physical size 10 in dia x 23 ft 5 1/8 inch long. On channel saddles 2'-6". ASME MAWP 800/Fv at 350F shell, 800/fv at 250F tubes. Manufactured by Precision Pipe & Vessel (PPV) in 2009. Material tubes 304L Stainless/shell CS. Insulated calcium silicate. See drawing in Links. Used for Gas Clean-up Feed/Effluent Exchanger. Part of fp311

Place Holder
Item 31-P-240A - Multistage Pump
Manufacturer
Sulzer
Model
MBN40-180/07
Capacity
197

Sulzer Multistage Pump. Complete pump, motor, base, coupling set. Sulzer pump, New in crate. Sulzer Medium Pressure Stage Casing Pump, model MBN40-180/07, S/N 121461/10.. Designed for 197 gpm at 1,376 TDH at 70F. Some surface rust. Motor is: Siemens 125HP motor SN D09T0042NPX 001, Amps 138, rpm 3575, Frame 444TS 460/3/60. Like new - only ran 42 days. Last used as solvent booster pump

Place Holder
Item 31-P-240B - Multistage Pump
Manufacturer
Sulzer
Model
MBN40-180/07
Capacity
197

Sulzer Multistage Pump. Complete pump, motor, base, coupling set. Model MBN40-180/07. Designed for 197 gpm at 1,376 TDH at 70F. Pump s/n 161475/10. Siemens 125HP motor SN E09T0042NPX 001, Amps 138, rpm 3575, Frame 444TS 460/3/60. Built.in service 6/30/2011. Used as solvent booster pump

Place Holder
Item 31-C-196 - Packed Column Absorber
Manufacturer
Koch Glitsch
Model

Absorber - packed column Designed by Koch-Glitsch, manufactured by Springs Fabrication in 2009. ASME MAWP 800 psig/FV at 350F, Nat'l Bd#2074, s/n 09-4163-2074. Physical size 5 ft dia Bottom/ 2'-4" Top x 87 ft tall. Materials 304SS/CS shell. Packing is Koch-Glitsch IMTP40 Random Packing (40mm nominal size, 153 kg/m3 density) w/ 304SS distributor/ 3 support trays - has 3 separate beds of 20 ft height each. Demister pad at top. Rated for 800 psig/FV, 350F. Column was used for cleaning CO2/BTEX. Ran 42 days in 2009 - idled in 2010. Still installed - price does not include removal. Includes structure and auxiliary instruments installed on it.

Place Holder
Item 31-V-128 - Separator Vessel
Manufacturer
A&B Process
Model
1400 gallons
Capacity
1418

Separator vessel mfg by A&B Process. ASME MAWP 150 psig at 250F internal/FV at 350F external, Nat'l Bd# 914, s/n 0912790601. Vertical vessel - Physical size 54"dia x 125" for capacity of 1418 gallons. Material 304SS tubes/CS shell. Includes Amistco mist eliminator. Built in 2009 - ran only 42 days - like new. Includes structure and associated instruments attached. Used as 1st Stage Booster Suction Separator - part of compressor module fp314

Place Holder
Item 31-V-140 - Separator Vessel
Manufacturer
A&B Process
Model

Separator vessel mfg by A&B Process. ASME MAWP 215 psig at 250F internal//FV at 350F external, Nat'l Bd# 915. Vertical vessel, Physical size 36"dia x134". Material 304L SS tubes and shell. Includes internal mist eliminator, structure, associated instruments attached. Used as 2nd Stage Booster Suction Separator - part of compressor module fp314

Place Holder
Item 31-V-212 - Separator Vessel
Manufacturer
A&B Process
Model
243 gallons
Capacity
243

Separator vessel mfg by A&B Process. ASME MAWP 400/FV at 250F, Nat'l Bd# 916, s/n 0912790603. Material 304L SS tubes and shell. Physical size 24"dia x120" for a capacity of 243 gallons. Mfg by A&B Process in 2009 - ran only 42 days - like new. Used as 3rd Stage Booster Suction Separator. Part of Compressor Module fp315

Place Holder