FSI bag filter 2-bag, stainless steel. Takes #2 bags. Model FSPN-252. ASME MAWP 150 psi at 250F. Quick release easy head removal. Ser num 60090. Surface area = 4.4 sf per bag, max flow rate 400 gpm. Inlet/outlet 3"/4". Qty (2) - priced separately

Alfa Laval PX60 centrifuge. Model PX60 VGD 14 CGH 60. Capacity approx 14,000 lb.hr - was running on veg oil for both primary separation and for degumming. 2 phase. Ser num 4077200, built 1994. Max bowl speed 6235 rpm. Max feed density 1040 kg/m3. Approx 30 HP motor with soft start. Includes controls, tools, water harness. Idled in 2020. See complete nameplate data in Link. Removed, ready to load

Alfa Laval PX65 centrifuge, sn 4201906-2011. Capacity approx. 22,000 lb/hr. Max speed 7500 rpm. Max density feed 1100 kg/m3. Includes tools, water harness, controls and VFD. Driven by 40 HP motor. Used for primary separation and degumming - 2 phase operation. Built 2011, This unit has now been removed and is ready for loading. See data plate info and actual operation video in Link.

Housing only - no screw. This is a New U-Trough stainless steel housing 10 inch. Has flanged discharge

V-trough screw conveyor, stainless steel. Size 10" x 10 ft long. Heavy duty 1/2" pitch screw. Designed for 5 TPH. Used as feed screw at the bottom of a hopper.

Shann expeller Model 8-99 with 200 HP motor 460/3/60. Capacity rated at 110 tons per day (TPD) pre-press and 70 TPD for full press. Press is 25 years old but has been rebuilt in 2016. It is in usable condition. It has shaft and colars installed, but needs external feed screw. Comes with spares: 2 main shafts with worms, spare worms, and main drive sheaves.

Sperry plate and frame filter presses. Mfg DR Sperry & Co, manual clean cast iron presses. Plate count (27) 30.5" x 30.5", non-gasketed. Approx 174 sq ft surface area. Center feed - corner outlet. Size 30, type 27-28. Rated pressure 100 psig. These are complete functioning units. Quantity (2) - priced separately

Stainless steel conveyor ribbon flight with mixing paddles. Designed for 100,000 pounds/hr. It has no motor but was sized for 10 HP. Used to incorporate moisture into meal. , size 24" x 20 ft long. Has hinged top covers

Regererative Thermal Oxidizer (RTO) rated at 1,200 scfm - expandable to 1,500 scfm. Mfg by Ship & Shore. 95% TE (media thermal effectiveness) and 98% DE (Destruction Efficiency rating). The refurbished 1,200 SCFM Regenerative Thermal Oxidizer (RTO) is equipped with an Exhaust Stack, 95% Media Thermal Effectiveness, Insulated Combustion Chamber, Insulated Dual Bed Media Chambers and Stainless-Steel Media Supports, and has a Destruction Efficiency Rating of 98%. Can be equipped with a New Controls System for additional cost (Including New Gas Train for Burner Operation to meet Industry Standards such as FM & NFPA 86 and New UL Approved Control Panel) and a New Variable Frequency Drive (VFD) for RTO Main Blower.

Regererative Thermal Oxidizer (RTO) rated at 56,000 scfm. Mfg by Ship & Shore. 95% TE (media thermal effectiveness) and 98% DE (Destruction Efficiency rating). The refurbished 56,000 SCFM Regenerative Thermal Oxidizer (RTO) is equipped with an Exhaust Stack, 95% Media Thermal Effectiveness, Insulated Combustion Chamber, Insulated Dual Bed Media Chambers and Stainless-Steel Media Supports, and has a Destruction Efficiency Rating of 98%. Can be equipped with a New Controls System for additional cost (Including New Gas Train for Burner Operation to meet Industry Standards such as FM & NFPA 86 and New UL Approved Control Panel) and a New Variable Frequency Drive (VFD) for RTO Main Blower.

Regererative Thermal Oxidizer (RTO) rated at 7,500 scfm - expandable to 10,000 scfm. Mfg by Ship & Shore. 95% TE (media thermal effectiveness) and 98% DE (Destruction Efficiency rating). The refurbished 7,500 SCFM Regenerative Thermal Oxidizer (RTO) is equipped with an Exhaust Stack, 95% Media Thermal Effectiveness, Insulated Combustion Chamber, Insulated Dual Bed Media Chambers and Stainless-Steel Media Supports, and has a Destruction Efficiency Rating of 98%. Can be equipped with a New Controls System for additional cost (Including New Gas Train for Burner Operation to meet Industry Standards such as FM & NFPA 86 and New UL Approved Control Panel) and a New Variable Frequency Drive (VFD) for RTO Main Blower.

New stainless steel feed screw conveyors with motors for Krupp expellers. Size 10 in wide U-trough x 111 inches long. Harburg-Freudenberger with 2 HP Nord gearmotor. Qty (2) - priced separately

Static Mixer, Kenics. Used for short time but condition excellent - suitable for food use. Kenics Model 1-KMS-6 Rated for 12 bar pressure at 150C. Material ss316. Serial Num 016068-01-1. Size 1 in dia pipe. Flow range 0.5 to 15 gpm depending on viscosity - see link for brochure and viscosity chart. The KM static mixes helical mixing element directs the flow of material radially toward the pipe walls and back to the center. KM static mixers provide precise blending and dispersion of all flowable materials, without utilizing moving parts.

Horizontal stainless steel tanks, size approx 6 ft dia x 20 ft long for capacity of 4,200 gallons. Have ss coils 1" dia x approx 47 lengths x 20 ft = approx 246 sq ft heat transfer area. Tanks are on stand (varies) - included. Atmospheric tanks, no nameplate. See photos. . Qty (5) - priced separately

Poly vertical tank approx 8'-3" dia x 14' side wall for capacity of 6,000 gallons. Material HDLPE, translucent blue with molded in calibration in gallons. Has 24" vented twisted lid Tank has molded 2" flanged outlet, 6" flanged heater port at the bottom and a 2" fill line flange. Dome top. OAH 182 inches. See drawing

Stainless steel vertical cone bottom tank on cs legs. Size approx 6 ft dia x 14 ft straight wall x approx 18 ft OAH for capacity of 3,500 gallons. Atmospheric tank, top manhole.

Vertical stainless steel tank, slight sloped bottom and sloped top. Single wall, atmospheric tank, no nameplate. Size approx 9'-6" dia x 19'-8" tall for capacity of 10,500 gallons. On legs

Portable truck loading platform access stairway with cage. Adjustable height. Aluminum construction with casters. Was used on trucks - can also be used on railcars.