Ring Dryer, GEA Barr-Rosin. Used for drying wet cake DDGS but can be used to dry almost anything ? such as hemp or other grains. Dries material from 65% moisture to 11% moisture, evap rate 66,463 #/hr. This dryer was designed to handle 112,861 wet infeed at 65% moisture and 440,000 #/hr dry recycle material. This design lends itself well for varying flows and moistures, and precludes clogging or clumping. Comes with Lo-Nox main burner natural gas fired 83 MMBTU, a 1200HP main fan, 2 combustion/exhaust fans 150HP, Fluid Bed Cooler and Baghouse, (2) paddle mixers, (9) drag and screw conveyors, (4) rotary valves, (4) cyclones, disintegrator. Designed for 67,109 #/hr wet grain + 45,752 #/hr syrup IN = 46,398 #/hr OUT Evap rate 66,463 #/hr Fan: 189,339 scfm 1300HP. Burner heat 83.1 MMBTU. See data sheet, P&ID, and GA in Links.

Regenerative Thermal Oxidizer single-cell (RTO) by Eisenmann, model MLM 200, serial no. A82-372. Rated at 67,030 scfm at 242 F. Valveless Regenerative Thermal Oxidizer (VRTO), Physical size 27.5 ft x 27.5 ft x 34 ft tall. With stack will be higher - stack is 6 ft OD x 63 ft tall stainless. Stack weight 20,000 pounds - Weight of entire RTO is 300,00 pounds. Reaction temp 1600 F, Burner Maxon 18M Kinedizer 18 MMBTU/hr natural gas. FD Fan is Twin City size 660 RTF 500HP and combustion fan is Twin City TBNA 24W10 40HP. Manual and drawings available. See selected drawings in Links. System is idle, still installed, ready for sale.