Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item 6576 - Air Cannon
Manufacturer
Stanam Industries
Model
AC 4

Airchoc AC 4 air cannon. Built by Stanam Industries. This air cannon is built specifically to blow a small amount of air into your silo or hopper to break up funnels and bridges of powdery substances. Capacity: 7 cubic ft @14.7 psi, 57.5 cubic ft @ 120 psi. 8" outlet diameter. Dimensions: 46"L x 27"W x 36"H. 58 lbs. Suitable to use for all clogging issues. Easily installed and very good reliability. Operating manual included.

Place Holder
Item 6592 - Air Cannon
Manufacturer
Stanam Industries
Model
AC 4

Airchoc AC 4 air cannon. Built by Stanam Industries. This air cannon is built specifically to blow a small amount of air into your silo or hopper to break up funnels and bridges of powdery substances. Capacity: 7 cubic ft @14.7 psi, 57.5 cubic ft @ 120 psi. 8" outlet diameter. Dimensions: 46"L x 27"W x 36"H. 58 lbs. Suitable to use for all clogging issues. Easily installed and very good reliability. Operating manual included.

Place Holder
Item 7140 - Barometric Condenser
Manufacturer
Kinema
Model

Kinema barometric condenser for thin film dryer. Model 844062-PY. Last used as 1st barometric on #4 thin film dryer

Place Holder
Item FP-1 - Belt Filter Press 4sf
Manufacturer
Oberlin
Model
OPF-04
Capacity
4

Oberlin pressure belt filter last used for glycerin filtration of biodiesel. Model OPF-04, serial 472MLP. Press area approximately 24" x 28" for 4 sq ft filter area. End discharge, cloth advance/roll up each driven by 1/4 HP motor. Oberlin OPW4 controls. Footprint of this OPF-4MLP is 68" x 53" x 56" H. Part of Biodiesel Plant PK-1800

Place Holder
Item 5718 - Bleacher - 150 TPD Stainless
Manufacturer
DeSmet
Model
Bleacher
Capacity
2000

DeSmet stainless steel vacuum bleacher for continuous bleaching. Total capacity is 150 tons per day. Size 5' diameter with 3.5" insulation, 14' tall. Demister pad section 4' diameter x 5' tall. OAH 19 feet. Includes 2 Krohne stainless steel mechanical flowmeters, one 1" and one 2". Includes additional side mounted small vessel and RTD for level control. Small vessel dimensions 1' diameter x 8' tall with 2" inlet. Includes 2 Masoneilan stainless steel 2" pneumatic control valves. Vacuum unit not available. Includes operators manual. Idled 2014. We have quoted removed and loaded but removal is an estimate. If serious, we can get a quote.

Place Holder
Item 41-CA-168 - Catalyst - Methanol
Manufacturer
Sud Chemie
Model

MegaMax 700 by Sud Chemie, 4 drums of Catalyst - New drums "Methanol Catalyst" - New drums. Note: Inventory not verified but believed to be (4) drume - new, not activated. - These catalyst drums may not be available:

Place Holder
Item 41-CA-196 - Catalyst - Sulfur Guard Bed
Manufacturer
Haldor Topsoe
Model

Catalyst - 2 drums of sulfur guard by Haldor Topsoe HTZ-4. 80-90% zinc oxide and 10-15% aluminum oxide, and 2 drums of Haldor Topsoe A/S. Alumina: 7 drums of alumina support balls packing rings. Catalyst: 3 drum TotsuCat AMA-1 catalyst. New drums

Place Holder
Item 41-R-168 - Catalytic Converter Reactor
Manufacturer
Wagner
Model
3.9 MMBTU
Capacity
7600

Catalytic Converter designed for 3.9 MMBTU/hr. Design specifications are for 14,500 gallons/day crude methanol or 12,500 gal/day mixed alcohols. Mfg by Wagner Plate Works in 2009. Size approx 7 ft dia ID x 17 ft s/s x 30 ft overall height for approximately 7,600 gallons capacity - tube bed approx 17 ft long. Has 1,028 x 1.9" O.D. tubes Sch 80 stainless steel TP304L, shell cs 516-70 4 inch thick. ASME Nat'l Bd 55, MAWP shell 2250 psig/FV at 650 F. MAWP tubes 1650 psig at 650F. Converter currently loaded with approx 150 cu ft methanol catalyst - Sud Chemie MegaMax 700. Still installed - price does not include removal. Note: we have the complete reactor module as well with all pieces shown in photos plus instruments - see asset ID FP411.

Place Holder
Item CS-2101C - Classifier Strainer
Manufacturer
AVA
Model

Classifier Strainer mfg by Advanced Vessel & Alloy (AVA). Size 14" OD x 128" OAL. On 35" legs for 56" OAH. Material stainless steel ss304. ASME MAWP 150 psig at 300F. Serial num 72002P. 12" inlet/" outlet with condensate on tubes 6". See drawing for details.

Place Holder
Item Z-7601CST - Condensate Collection Skid
Manufacturer
Model

Steam trap and condensate recovery skid with small tank & condensate pumps. below E-7601

Place Holder
Item Z-7602C - Condensate Collection Skid
Manufacturer
Model

Condensate recovery skid, Campbell-Seavey skid, tank, condensate pumps skid

Place Holder
Item Z-4103C - Condensate Collection Skid
Manufacturer
Model

Campbell-Seavey condensate collection skid & pumps. at E-4103 outlet

Place Holder
Item Z-4101C - Condensate Collection Skid
Manufacturer
Model

Campbell-Seavey outlet condensate collection skid & pumps. at E-4101

Place Holder
Item Z-4202C - Condensate Collection Skid
Manufacturer
Model

Condensate return system, skid mounted. Mfg by Campbell-Sevey. ASME NB # xxxx MAWP 187 psig at 400F. Wheeler condensate receiver model 10611, (2) Armstrong pump traps PT-312, steam traps, valves, all on self-contained skid. Sn xxxx. There are three of these systems asset Z-4103, Z-4202, Z-7601. Price quoted here is for this skid only. At E-4202 outlet

Place Holder
Item Z-4101 - Condensate Package
Manufacturer
Wheeler tank
Model

Condensate collection package. Includes Wheeler tank vertical and Goulds condensate pump (see asset PC-4101) 3x4-10 pump/motor/bedplate. Mfg by Campbell Sevey sn 4872-B ASME NB # 12171 MAWP 150 psig at 450F. Used as Beer column condensate collection package. Physical size of skid is approx 4' W x 9'8" L x 12'8" Tall. Estimated total weight 3,000 lbs. If take tank off, Tank would be 3' W x 12'5" L x 4' Tall and Skid would be 4'W x 9'8"L x 7'4" Tall.

Place Holder
Item LOT-85 - Cooling Tower 125 ton
Manufacturer
Whaley Towers
Model
WP1850-125
Capacity
125

Cooling tower by Whaley towers. Model WP1850-125. 1,875,000 BTU/HR. 125 tons. Elevated open loop cooling tower. Cooling tower pump tank 1000 gallon capacity. (T-602). Dimensions approx 84" w x 84" long x 122" high. Fan motor 5 HP, flow nominal 375 gpm.. PVC wet deck - fiberglass shell housing.

Place Holder
Item 7553 - Cooling Tower 680 ton
Manufacturer
BAC
Model
VT1-680-PMC
Capacity
680

Used BAC Cooling towers, Model VT1-680-PMC. Certified Capacity 680 tons, 1750 USGPM of water from 95F to 85F at 78F entering wet bulb and 0.9 psig spray pressure. (2) 25 HP fan motors, 1800 RPM, 3 phase, 60 Hz, 230/460, standard TEFC enclosure, fan drives based on 0" ESP. Built 1992

Place Holder
Item 6227 - DeHydration Unit
Manufacturer
Wintek
Model
.

Wintek Corporation DeHydration Unit. Like NEW - only 31 run hours!! This DeHy is a flash tower with condensate/receiver and vacuum system. Capacity feed content is designed for 12 to 21 gpm feed oil with up to 0.25% water. - based on soy oil modeled as a triglyceride. System consists of feed heat exchanger, a flash tank, a transfer pump, a pre-condenser, receiver tank with transfer pump, and a 10HP liquid ring vacuum system. Flash tower is cs 16 inch dia. DeHydration Unit is used to remove the water from your feed oil. When hot feed oil is exposed to a high vacuum, the water will flash into water vapor and be removed by the vacuum system. This system is skidded - removed and ready to load. Loading fee may apply depending on customer requirements and destination. See complete dehy design specs in attached file (link)

Place Holder
Item Z-6107C - Denaturant Pump & Skid
Manufacturer
Model

Denaturant unloading pump skid

Item 7472 - Deodorizer Vessel SS
Manufacturer
Model
Capacity
500

500 Gallon Deodorizer Vessel NEW Size: 42 in Dia by 7 ft sidewall with dished top and bottom heads Rating: Full Vacuum at 500 F MOC: 304L SS, Coils: 304L SS Sch 80 pipe rated 150 psig at 300 F for Cooling Water with 15 turns Sparger Coil: 304 L with 3 turns and 10 - 1/8" holes facing down Nozzles: 2 in Oil Inlet, 2 in Oil Outlet, 1 in Temperature Transmitter, 1 in Pressure Transmitter, 8 in Vacuum, 1 in Sample, 18 in Manhole, 2 in sight glass, 1 in CW in, 1 in CW out, 1 in Steam In, 8 in heater flange Supports: 4 Lugs All vessels are designed and constructed according to the ASME Boiler & Pressure Vessel Code Section VIII Division I, but will NOT be 'U' stamped. In addition, the system and components are designed to facilitate maintenance where required. Delivery: 8 to 12 weeks after final drawing approval. Photo is not actual Deodorizer Vessel - similar item shown for reference only.

Place Holder
Item X-5210 - Disintegrator
Manufacturer
GEA Barr Rosin
Model
Capacity
12

Disintegrator. Size 84" dia x 42" wide cold disintegrator. Beater section 3' 6" wide x 84" dia. Overall dimensions 10' 6" length x V-belt drive (5 grooves) by 150 HP motor at 900 rpm for an operating speed of 278 rpm TEFC frame 449T 460/3/60. See link for drawing.

Place Holder
Item 380-EQ-870 - Evaporator
Manufacturer
Unitech
Model
.

Evaporator rated at 45,000 lbs/hr. Unitech Titanium falling film evaporator manufactured in 1993 but unused until 2008 then operated for approximately 9 months. Includes Incoloy 825 vapor body, 15,862 SqFt heat transfer section with 872 Grade 2 Titanium 2 inch OD tubes x 36 ft long; and MVR compressor driven by a 500HP motor. Design train capacity is 92 GPM, distillate flow 83.95 gpm. This converts to 44,457 lbs/hr water evaporation. Part of Evaporator package. For a list of all components, enter "pkevap" in the keyword search terms box.

Place Holder
Item 2412 - Expeller Duo 33
Manufacturer
Anderson
Model
Duo 33

Anderson Duo 33 available used as-is. Including: Carbon Steel Heavy Duty Construction, Used in Good condition Herringbone Main Gear Case, Horizontal Main Shaft, Screw Feeder with Gearhead Drive, 33" Horizontal Barrel Cages with bars, Vertical Worm shaft, T-53 Thrust Unit, Manually operated choke unit, oil conveyor, Vertical Gearhead Drive, Used 40 or 50 HP Main Horizontal Drive Motor, Unit Sandblasted and primed. Qty 2, priced separately

Place Holder
Item 2410 - Expeller Duo 55
Manufacturer
Anderson
Model
Duo 55

Anderson Duo 55 units available sold as-is where-is Including: Carbon Steel Heavy Duty Construction, Used in Good condition Herringbone Main Gear Case, Horizontal Main Shaft, Screw Feeder with Gearhead Drive, 55" Horizontal Barrel Cages with bars, Vertical Worm shaft, T-53 Thrust Unit, Manually operated choke unit, olil conveyor, Vertical Gearhead Drive, Used 50 or 60 HP Main Horizontal Drive Motor, Unit sandblasted and primed.

Place Holder
Item H2036 - Filter sock
Manufacturer
Model

Filters for polish filter. 6 boxes of 25 bags each. Bags measure 2 ft 5 in long.

Place Holder