Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item 2046 - Dewatering Screw Press 4 tpd
Manufacturer
Vincent
Model
CP-6VT
Capacity
350

Vincent dewatering screw press Model CP-6VT, serial 19456-1. Full vapor tight press capable of 350 lbs per hour on a dry basis (4 tons/day). Can do 98% on oleoresin recovery, and 75-80% ethanol recovery. Driven by 5HP motor 480 v 3/60 with VFD explosion proof. Food grade on all contact surfaces. Comes with stand. Screw is 6" diameter with 5 stages of compression. Bought in 2019 - used less than 1 year. Very good condition. Part of an entire CBD extraction system - enter PK6020 to see all components.

Place Holder
Item 6718 - Expander
Manufacturer
Tecnal
Model
8 inch

Tecnal 8 inch expander. Used condition - Nice, cleaned, sand-blasted and painted. Includes 150hp motor and guard for V-belt drive (No belts). The machine was last run on cracked soybeans and was doing a great job for them. The reason it was removed was because the owner wanted to standardize on a different brand throughout his plant. This unit does come with a 150 HP and can be used as an extruder to condition, rupture, and shear the soybean oil cells prior to going into the expeller press or it can be used as an expander (with some modifications) to make porous collets prior to solvent extraction.

Place Holder
Item 5383 - Extruder
Manufacturer
Dox
Model
8 inch

Dox 8" Extruder. This machine was last used on cotton seed to feed 2 Anderson 33 Duo expellers. Used, As Is, Excellent conditionThis unit comes with its feeder, dog leg chute with magnets, and 150 HP motor. Unit has been cleaned, sand blasted, primed and painted.

Place Holder
Item 6230 - Press
Manufacturer
Shann
Model
9/99RT

Shann Press Model 9/99RT - to full press extruded soybeans. It has been removed and is in storage. It has a spare shaft and cages with some loose parts. Serial number is 3307 with a 150HP Main Drive motor. It will full press 100TPD or Prepress 200TPD.

Place Holder
Item 5450 - Press 60 to 95 MTPD
Manufacturer
Shann
Model
9-99RT
Capacity
60

Shann Full Press Model 9-99RT Serial Numbers 3294-1 and 3294-2. Motor HP 370. Brand New - never used or installed. Capacity at Full Press rated to 60 MTPD on soybean - with extruder ahead of it can do 95 MTPD. All parts are there - complete press. RT design allows the press to be reversed in case of an overload. Quantity (2) sold together as a lot.

Place Holder
Item 1466 - Press, Oil Press 60-150 TPD
Manufacturer
Goyum
Model
1500
Capacity
150

Used Goyum oil press Model G-1500. Capacity: 140 to 150 Ton (In 24 Hours) in pre-pressing and 50-60 Ton in Single & Final crushing (Capacity differs with material density & quantity of oil in it.). This model has been designed in a simple and symmetrical shape. Used as expeller or press. Ser no. 512 with 180HP ABB motor. Built 2007. Triple Reduction Gear Box with helical gears of cast steel and pinion shafts of special steel. Gearbox is aligned with all the bodies on a single fabricated base. This expeller has Three chambers of Cast Steel, vertically hinged. Each of 36" long. Cake thickness can be adjusted on running Machine. Worm Assembly, discharge ring, compression ring are all hard faced welded. Main Worm Shaft can be withdrawn without disturbing the Gear Box. The shaft is water cooled. Crammer Shaft for extra cramming of the Seed or Cake in the feed body is completely supported on Bearings. Overall Machine Dimensions (Approx.) Length:3550mm, Breadth:1300mm, Height:3600mm (including motor for kettle gearbox)

Place Holder
Item 1470 - Press, Oil Press 60-150 TPD
Manufacturer
Goyum
Model
1500
Capacity
150

NEW, never installed. Goyum oil press Model G-1500. Capacity: 140 to 150 Ton (In 24 Hours) in pre-pressing and 50-60 Ton in Single & Final crushing (Capacity differs with material density & quantity of oil in it.). This model has been designed in a simple and symmetrical shape. Used as expeller or press. Ser no. 512 Has NO Motor. (Designed for 180HP). Built 2007. Triple Reduction Gear Box with helical gears of cast steel and pinion shafts of special steel. Gearbox is aligned with all the bodies on a single fabricated base. This expeller has Three chambers of Cast Steel, vertically hinged. Each of 36" long. Two of the 3 cage assemblies have been removed. Cake thickness can be adjusted on running Machine. Worm Assembly, discharge ring, compression ring are all hard faced welded. Main Worm Shaft can be withdrawn without disturbing the Gear Box. The shaft is water cooled. Crammer Shaft for extra cramming of the Seed or Cake in the feed body is completely supported on Bearings. Overall Machine Dimensions (Approx.) Length:3550mm, Breadth:1300mm, Height:3600mm (including motor for kettle gearbox)

Place Holder
Item 2023 - Screw Press 35-75 gpm
Manufacturer
PT&M
Model
E-10
Capacity
75

Screw press by Press Technology & Mfg, Inc. Model E-10, ser # 16419-01 17-1340. Has a 10 inch diameter screw shaft driven by 10HP motor. Capacity 35 - 75 gpm on solids at 6% or less. Like NEW - used at start-up then taken out of service and stored. Overall dimensions 100" x 27" x 55" tall. Approx weight 1200 lbs. See drawing in links

Place Holder
Item 8403 - Screw Press 60-70 TPD
Manufacturer
Krupp
Model
EP-07
Capacity
70

Krupp Ep-07 Press, used. We have primed and painted and cleaned it inside and out so the press actually looks as good as if it had been rebuilt. Used As Is, Excellent condition. , The last application was soybeans where it was running at a capacity of 60-70 TPD on extruded soybean material. The press comes with 150 H.P. motor 230/460v 3/60, V-belt drive with pulley. Capacity up to 75 to 80 TPD. It has been setup for a full pressing application but was originally a pre-press and should be able to reconfigured to that (pre-press) if desired.

Place Holder
Item B2107 - Screw Press, Sprout Bauer 100 tpd
Manufacturer
Sprout-Bauer
Model
575
Capacity
100

Screw Press dewatering press by Andritz Sprout-Bauer Model 575. Main drive Siemens 75 HP motor 460/360 at 1780 rpm. With Falk gear reducer. Capacity approximately 100 short tons per day (tpd) depending on feed stock. Last used for pressing corn germ. See drawing in Links for details. Qty (3) presses - priced separately

Place Holder