Vincent dewatering screw press Model CP-6VT, serial 19456-1. Full vapor tight press capable of 350 lbs per hour on a dry basis (4 tons/day). Can do 98% on oleoresin recovery, and 75-80% ethanol recovery. Driven by 5HP motor 480 v 3/60 with VFD explosion proof. Food grade on all contact surfaces. Comes with stand. Screw is 6" diameter with 5 stages of compression. Bought in 2019 - used less than 1 year. Part of an entire CBD extraction system - enter PK6020 to see all components.

Shann expeller Model 8-99 with 200 HP motor 460/3/60. Capacity rated at 110 tons per day (TPD) pre-press and 70 TPD for full press. Press is 25 years old but has been rebuilt in 2016. It is in usable condition - selling As Is Where Is. It has shaft and colars installed, but needs external feed screw. Comes with spares: 2 main shafts with worms, spare worms, and main drive sheaves.

Inst Pro Press Model 5005. Has main cage barrels, main worm shaft ass'y, 60 HP motor 575v 3/60, control panel Capacity rated from 1.7 to 1.9 MTPH (about 40-45 MTPD). Last used for soybean etrusion

Shann Full Press Model 9-99RT Serial Numbers 3294-1 and 3294-2. Motor HP 370. Brand New - never used or installed. Capacity at Full Press rated to 60 MTPD on soybean - with extruder ahead of it can do 95 MTPD. All parts are there - complete press. RT design allows the press to be reversed in case of an overload. Quantity (2) sold together as a lot.

Used Goyum oil press Model G-1500. Capacity: 140 to 150 Ton (In 24 Hours) in pre-pressing and 50-60 Ton in Single & Final crushing (Capacity differs with material density & quantity of oil in it.). This model has been designed in a simple and symmetrical shape. Used as expeller or press. Ser no. 512 with 180HP ABB motor. Built 2007. Triple Reduction Gear Box with helical gears of cast steel and pinion shafts of special steel. Gearbox is aligned with all the bodies on a single fabricated base. This expeller has Three chambers of Cast Steel, vertically hinged. Each of 36" long. Cake thickness can be adjusted on running Machine. Worm Assembly, discharge ring, compression ring are all hard faced welded. Main Worm Shaft can be withdrawn without disturbing the Gear Box. The shaft is water cooled. Crammer Shaft for extra cramming of the Seed or Cake in the feed body is completely supported on Bearings. Overall Machine Dimensions (Approx.) Length:3550mm, Breadth:1300mm, Height:3600mm (including motor for kettle gearbox)

NEW, never installed. Goyum oil press Model G-1500. Capacity: 140 to 150 Ton (In 24 Hours) in pre-pressing and 50-60 Ton in Single & Final crushing (Capacity differs with material density & quantity of oil in it.). This model has been designed in a simple and symmetrical shape. Used as expeller or press. Ser no. 512 Has NO Motor. (Designed for 180HP). Built 2007. Triple Reduction Gear Box with helical gears of cast steel and pinion shafts of special steel. Gearbox is aligned with all the bodies on a single fabricated base. This expeller has Three chambers of Cast Steel, vertically hinged. Each of 36" long. Two of the 3 cage assemblies have been removed. Cake thickness can be adjusted on running Machine. Worm Assembly, discharge ring, compression ring are all hard faced welded. Main Worm Shaft can be withdrawn without disturbing the Gear Box. The shaft is water cooled. Crammer Shaft for extra cramming of the Seed or Cake in the feed body is completely supported on Bearings. Overall Machine Dimensions (Approx.) Length:3550mm, Breadth:1300mm, Height:3600mm (including motor for kettle gearbox)

Shann Press Model 9/99RT - to full press extruded soybeans. It has been removed and is in storage. It has a spare shaft and cages with some loose parts. Serial number is 3307 with a 150HP Main Drive motor. It will full press 100TPD or Prepress 200TPD.

Insta-Pro continuous press with crammer, Model 4500, serial 37. Capacity approx 3 TPH. Idled - last ran in 2021. Motor not included. Last running soybean. These units were in running condition when taken out - buyer to assess. We have 3 of these presses - can make a package deal.

Insta-Pro continuous press with crammer, Model 4500, serial 38. Capacity approx 2 TPH. Idled - last ran in 2021. Motor not included. Last running soybean. These units were in running condition when taken out - buyer to assess. We have 3 of these presses - can make a package deal.

Insta-Pro continuous press with crammer, Model 4500, Capacity approx 2 TPH. Idled - last ran in 2021. Motor not included. This press is partially disassembled but all parts are there. Nameplate missing. Last running soybean. These units were in running condition when taken out - buyer to assess. We have 3 of these presses - can make a package deal.

Krupp Ep-07 Press, used. We have primed and painted and cleaned it inside and out so the press actually looks as good as if it had been rebuilt. Used As Is, The last application was soybeans where it was running at a capacity of 60-70 TPD on extruded soybean material. The press comes with 150 H.P. motor 230/460v 3/60, V-belt drive with pulley. Capacity up to 75 to 80 TPD. It has been setup for a full pressing application but was originally a pre-press and should be able to reconfigured to that (pre-press) if desired.

Reconditioned Goyum screw press model G-150, ,size 45 x 7.5 x 6.5. Serial # 26. Manufactured March 2009, idled in 2021. Rated at 15 TPD to 20 TPD (tons per day). Sized for 20 HP motor (not included). Physical size approx 8'-8" long x 4'-7" wide, weight 8800 pounds. Owner says has been completely reconditioned in December 2022. Selling As Is Where Is. It has a double reduction gear box with steel casted helical gears and a cast steel chamber with four sections. The sizes of the vertically hinged chamber are as follows: 6 inches diameter x 37 inches long. The worm assembly is case hardened a with hard faced discharge and compression ring. The thickness of the cake can be adjusted while the machine is running. The main worm shaft can be withdrawn without disturbing the gear box. The crammer shaft allows for extra cramming of the seed or cake in the feed body.

Goyum screw press Reconditioned model G-150, ,size 45 x 7.5 x 6.5. Serial # 25. Manufactured March 2009, idled in 2021. Owner says Reconditioned in December 2022, selling As Is Where Is. Rated at 15 TPD to 20 TPD (tons per day). Sized for 20 HP motor (not included). Physical size approx 8'-8" long x 4'-7" wide, weight 8800 pounds. It has a double reduction gear box with steel casted helical gears and a cast steel chamber with four sections. The sizes of the vertically hinged chamber are as follows: 6 inches diameter x 37 inches long. The worm assembly is case hardened a with hard faced discharge and compression ring. The thickness of the cake can be adjusted while the machine is running. The main worm shaft can be withdrawn without disturbing the gear box. The crammer shaft allows for extra cramming of the seed or cake in the feed body.

Screw Press dewatering press by Andritz Sprout-Bauer Model 575. Main drive Siemens 75 HP motor 460/360 at 1780 rpm. With Falk gear reducer. Capacity approximately 100 short tons per day (tpd) depending on feed stock. Last used for pressing corn germ. See drawing in Links for details. Qty (3) presses - priced separately