Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item LOT-123 - Breaker Panel 4000A
Manufacturer
Cutler Hammer
Model
PRL4

Main electrical breaker panel 4000A. Model PRL4. Has (2) 1200A breakers and (4) 400A breakers. 480 volts.

Place Holder
Item D1073 - Coupler
Manufacturer
Allen Bradley
Model
DH-485

SLC 500 Coupler DH-485 link coupler

Place Holder
Item LOT-126 - Disconnects 30A
Manufacturer
Cutler Hammer
Model
.

Fused electrical disconnects - set of seven as a single lot. Cutler Hammer 30 amp 600v max 3 pole

Place Holder
Item LOT-10 - Electrical Cable & Trays
Manufacturer
Model
.

All electrical and instrument cabling within the North tank farm area. Includes cable trays. Buyer to remove - sold As Is Where Is.

Place Holder
Item LOT-130 - Electrical Cables & Trays (Process)
Manufacturer
Model
.

All electrical cables, conduits and cable trays within the Process building. Sold As Is Where Is - Buyer to remove.

Place Holder
Item 5394 - Emergency Generator 1000 KW
Manufacturer
Cummins
Model
QST30-G5
Capacity
1000

Emergency Generator 1000 KW 480/3/60. Cummins Model QST30-G5. Built 2007, idled 2019. Very low hours. Number of starts 235, Running hours 74 hours per panel. Last inspected 10-4-2019 with 73 hours. Stand-by emergency generator - Rated for standby 1112 KW/prime 1007 KW. Diesel engine 1800 rpm. Engine is 4 cycle, inline, turbocharged. Engine number 37220496, displacement 30.106 cu in, fuel rate 425 cu mm/stroke. Fuel consumption 72.7 gallons/kWh. Generator Data: Cummins ser no. X07D143061, KVA base rate 1690, KW base rate 1352. Rpm 1800. Volts 480v 3/60. Rating cont. Includes 1600A breaker 480v in enclosure. Was inspected and brought within specs semi-annually by Luby. Used as standby generator.

Place Holder
Item 6015 - Expeller Vertical Hopper Feeder Drive
Manufacturer
Anderson
Model
.

Rebuilt Vertical Hopper Feeder Drive for 33 or 55 DUO Expeller - Thrust Unit Housing, cleaned, Sandblasted and Primed. - Thrust bearing. - Front and Back End Bearings. - Crown & Gear set. - Seals and Gaskets.

Place Holder
Item 7642 - GenSet Package 10.5 MW
Manufacturer
Solar Turbines
Model
Capacity
10500

10.5 MW cogen plant. Built in 1996 by Solar Turbines, a Caterpillar company. Includes all controls, Mars 100S genset, Deltak 46,500 #/hr HRSG boiler with natural gas burner, Marley NC9141GM cooling tower, Powell switchgear. The deaerator and turbine have already been sold and are no longer available, but the gearbox and generator are still there. Gearbox is Allen Gears Solar Mars 1800 RPM Epicylic Star (Decreasing) Model 20845.

Place Holder
Item 7016 - IP20
Manufacturer
Allen Bradley
Model
160-BA04NPS1

Allen Bradley Preset Spd. Series C. Model 160-BA04NPS1. Input 380-460 volts, 50/60 hz. Output: 380-460V.

Place Holder
Item LOT-125 - Lighting Panel
Manufacturer
Cutler Hammer
Model
PRL2A

Cutler Hammer lighting panel type PRL2A, 208Y/120 volts. Panel amps 150A 3 phase

Place Holder
Item LOT-124 - Lighting Panel
Manufacturer
Cutler Hammer
Model
PRL2A

Cutler Hammer lighting panel type PRL2A, 208Y/120 volts. Panel amps 150A 3 phase

Place Holder
Item MCC-G1 - MCC 1200A
Manufacturer
Square D
Model
Capacity
1200

Motor Control Center (MCC) Square D with 1200A incoming disconnect. Has (3) size 1 starters, (1) size 2 starter, and (2) size 3 starters. Includes (2) heavy duty reversing soft starts 600A for 350 HP motor hamermills, and (2) 3HP VFD,. Availability might be delayed.

Place Holder
Item MCC-G2 - MCC 1200A
Manufacturer
Square D
Model
Capacity
1200

Square D Motor Control Center (MCC) rated 1200A 480v 3/60 with 1200A incoming disconnect. Has 34 starters, 5 VFD. There are (19) size 1 starters, (6) size 2, (4) size 3 and (5 size 4 starters, including (2) 40HP VFD, (1) 30HP VFD, (1) 15HP VFD, and (1) 5HP VFD. Availability might be delayed.

Place Holder
Item MCC-M1 - MCC 1200A
Manufacturer
Square D
Model
Capacity
1200

Motor Control Center (MCC) Square D 1200A 480v 3/60 with incoming 1200A disconnect. Has 23 starters, 3 VFD. Has (5) size 1 starters, (5) size 2, and (1) size 4 starter. Also (11) 30A fused heaters, (1) 300 HP VFD, (1) 300 HP soft start, and (1) 20 HP VFD. Availability might be delayed.

Place Holder
Item MCC-M2 - MCC 1200A
Manufacturer
Square D
Model
Capacity
1200

Motor Control Center (MCC) Square D 1200A 480v 3/60 with incoming 1200A disconnect. Has 14 starters, 13 VFD. Starters are (9) size 1, (4) size 2, (1) size 5. Also (1) 100HP VFD, (1) 75 HP VFD, 10HP VFD, (2) 7.5 HP VFD, and (8) 3 HP VFD. Availability might be delayed.

Place Holder
Item MCC-M3 - MCC 1200A
Manufacturer
Square D
Model
Capacity
1200

Motor Control Center (MCC) Square D 1200A 480v 3/60 with 1200A dicnnect. Has (6) 200 HP VFD for Fermenter & Beer pump & Mash booster pump. Availability might be delayed.

Place Holder
Item MCC-MEM - MCC 1200A
Manufacturer
Square D
Model
Capacity
1200

Motor Control Center (MCC) Square D 1200A 480v 3/60 with 1200A disconnct. Has12 starters - (3) size 3, (5) size 2, (4) size 1. Also 250A breaker, 150A breaker, 30A heater, 125 HP VFD, and 3 HP VFD. Availability might be delayed.

Place Holder
Item MCC-D1 - MCC 1200A
Manufacturer
Square D
Model
Capacity
1200

Motor Control Center (MCC) Square D 1200A 480v 3/60 with 1200A disconnect. Has (9) size 1 starters, and (3) 250 HP vfd. Availability might be delayed.

Place Holder
Item MCC-D2 - MCC 1200A
Manufacturer
Square D
Model
Capacity
1200

Motor Control Center (MCC) Square D 1200A 480v 3/60 with 1200A disconnect. Has. (4) size 1 starters, (1) 250 HP VFD, and (2) 200 HP VFD. Availability might be delayed.

Place Holder
Item MCC-D3 - MCC 1200A
Manufacturer
Square D
Model
Capacity
1200

Motor Control Center (MCC) Square D 1200A 480v 3/60 with 1200A disconnect. Has (11) size 1 starters, (1) size 2, (2) size 3, and (2) size 5 starters. Also (2) 150 HP soft start, 75 HP VFD, 40HP VFD, 25 HP VFD, 20 HP VFD, and 10HP VFD. Availability might be delayed.

Place Holder
Item MCC-D4 - MCC 1200A
Manufacturer
Square D
Model
Capacity
1200

Motor Control Center (MCC). Square D 1200A 480v 3/60 with 1200A disconnect. Has (5) size 1 starters, (4) size 2, (1) size 3, and (4) size 4 starters. Also 150 Hp VFD, 125 HP VFD, and 30 HP VFD. Availability might be delayed.

Place Holder
Item MCC-DEM - MCC 1200A
Manufacturer
Square D
Model
Capacity
1200

Motor Control Center (MCC) Square D 1200A 480v 30/60 with 1200A disconnect. Has (1) size 1 starter, 250A breaker, 150A breaker, and 250 HP soft start. Availability might be delayed.

Place Holder
Item MCC-MV - MCC 4160v 600A
Manufacturer
Square D
Model

Medium voltage MCC 4160v 3/60. Square D with 6000A infeed disconect. Feeds main dryer fan 1300 HP breaker, and chiller motor 1400 HP. Availability might be delayed.

Place Holder
Item LOT-53 - Motor
Manufacturer
TECO
Model
.

Teco Westunghouse electric motor, 5 HP 1200 rpm inverter duty. Model Max-E1/31 high efficiency. 230/460 volts 3/60. Frame 215T TEFC

Place Holder
Item M107 - Motor
Manufacturer
Marathon
Model

Marathon electric motor. Frame 286T. 1765 RPM. 230/460V

Place Holder